Battery Details
Crate Serial Numbers
Work Order Details
These fields update the Rail Battery register. Load an open work order (top) or add a new battery to edit its record here.
Section 1 — Tooling
Enter the tooling used during this maintenance. All tooling checked for serviceability and calibration prior to use.
| Description | Tool Number | Next Calibration Due |
|---|---|---|
Section 2.1 — Initial Inspection
Section 2.3 — Arrival Photos
📷 Click to upload arrival photos
JPG, PNG accepted
Add a label under each photo — it is printed beneath the photo on the report.
Section 2.4 — Data Plates
📷 Click to upload data plate photos
Add a label under each photo — it is printed beneath the photo on the report.
Section 2.5 — Post-Cleaning Photos
📷 Click to upload post-cleaning photos
Add a label under each photo — it is printed beneath the photo on the report.
Section 2.2 — Discharge Figures
Import the discharge recording CSV from the charge/discharge equipment. Cell readings populate automatically — manual entry is disabled.
Section 3.1 — Charge Figures
Section 3.2 — Capacity Check
Discharge at 0.2 C5A (75A) down to 20V. Acceptance: battery capacity > 80% of rated (300 Ah).
Section 3.3 — Capacity Calculations
Result
Section 4.1 — Final Charge Figures
Section 4.3 — Conclusion
Overall Result
Section 4.2 — Post-Maintenance Photos
📷 Upload post-maintenance photos
Add a label under each photo — it is printed beneath the photo on the report.